DIY Spray Paint Sports Rims
These photos are sent by a fellow forum reader Joe on his DIY spray paint job for sports rims in white color. It was done over a weekend with the cost of around RM 20.
The items needed for this project:
- Old newspaper
- Two cans of white paint (Ace white glossy finish)
- One can of clear paint (for glossy finish)
- Sand paper
- Masking Tape
You also need the tools for removing your wheels, which includes a jack and the wrench that came in your car. Use a few red bricks to support your car at the jacking points while the wheels are removed.
The material
First, wash the wheels thoroughly and sand it to remove any greese and dirt. Rinse and let dry to provide a fresh surface for the paint to stick on.
Next, mask all the area you do not wish to paint with the tape and newspaper.
The wheels are ready to be painted. Spray thin and even layer on the surface of the wheel, let dry. Repeat at least 3 times. It is always better to put on more layers instead of spraying one thick layer, this will prevent the paint to be uneven or develop “tear drops” due to gravitational pull. Once done with the white paint, spray a thin layer of clear coat for the glossy finish.
That’s it, wheels are ready to roll! Avoid spraying the lug nuts as the paints can go off easily when force is applied during refitting the wheels. However, you can consider some “designer” new lug nuts easily found at accessory stores.
Finished product fitted on a Satria, now looks a little sexier. Thanks Joe for the photos.